Information

34V 6A Power supply 200 watts

34V 6A Power supply 200 watts
Views: 14702 Product Code: 10000008
Availability: In Stock
$69.00

Available Options


* Power Cable (3 pin):

Qty: Add to Cart

34V 6A Power adaptor for UD80, T1 and other amplifiers (changed from 36V to 34V for safety margin for max 36V amps)

Input: Worldwide 100-240V 50-60Hz

Plug is standard 5.5/2.5mm

Net weight: 0.97KG 
Gross weight 1.24KG

CE approved

Specs:

  • AC input voltage rating: 100VAC to 240VAC
  • AC input frequency : 50/60Hz
  • Input current:3A max
  • Inrush current: 50A max. for 110V/60Hz at cold start (25°C) 
  • Efficiency: 85% (Min.) at 220VAC/50Hz input with full load
  • RATED OUTPUT: 34VDC 6A
  • Ripple max 120mA
  • Turn-on delay time 1S 
  • Hold up time 8mS
  • Dielectric withstand (Hi-pot) test: /Primary to Secondary AC1500V, 5mA max., 1 minute for type test, AC 1500V 3 second for production.

Protection Features:

  • Over-Current Protection: The power supply shall be protected when any output operating in overload condition.  Under any line condition for an indefinite period of time. The power supply shall be self-recovery when the fault condition is removed. 
  • Short-Circuit Protection:  The power supply shall be protected when any output operation in circuit short condition. The power supply shall be Auto restart when the fault condition is removed. 
  • Over-Temperature Protection: The power supply shall be protected when the temperature higher than the IC thermal shutdown temperature. After the temperature less than the IC thermal shutdown temperature. The power supply shall be self-recovery. 

Environmental Conditions:

  • The power supply shall be capable of operating continuously in any mode without performance deterioration in the following environmental conditions. 
  • Operating Temperature:0°C~40°C ;
  • Relative Humidity:10%~90%; 
  • Vibration: 1.0mm,10-25Hz,15 minutes per cycle for each axis (X,Y,Z)
  • Storage Temperature:-20°C~70°C 
  • Storage Relative Humidity:10%~90% Vibration and Shock ; 
  • The power supply shall be designed to withstand normal transportation vibration per MIL-STD-810D, method 514 and procedures X, as it is mounted in the chassis assembly and packed for shipping. 

 

There are no reviews for this product.

Write a review

Your Name:


We do not moderate any reviews except those postings that are clearly not reviews. Questions or comments that are not reviews might be deleted. If you have a question, please contact us. Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



34V 6A Power adaptor for UD80, T1 and other amplifiers (changed from 36V to 34V for safety margin fo..
$69.00

24V 8.33A Power adaptor for UD80, T1 and other amps. Plug: 5.5/2.5mm Input voltage: 100V ..
$39.99
1 reviews

Handmade good quality RCA cables with 4N 99.99% oxygen free copper signal line, 3% silver solder wir..
$14.99

A very small, cheap and convenient microUSB OTG adaptor. This enables you to connect DAC's and USB t..
$2.49

The HiFime UDP80 is a true Digital PWM amplifier with no A/D conversion, no preamp or..
$109.00
5 reviews

Our original and bestselling Sabre dac with ES9023 DAC chip, SA9023 USB receiver. The newest ba..
$42.00
37 reviews

The Hifimediy Sabre U2 Asynchronous DAC was developed by DIY (do it yourself} enthusiasts in th..
$59.00
42 reviews

edit: New High-Speed isolator available here: Hifime High-Speed USB Isolator ($79) The Hi..
$29.99
16 reviews

Best portable DAC in Norwegian newspaper VG! 6 stars and best portable DAC of the Year in Lyd og Bil..
$69.00
24 reviews

US : 54.166.250.213